Adding Muliple IP Address for Windows

  • Check IP using ipconfig /all




  • Use this command below for Adding Multiple IP Addresses at Once


  • FOR /L %A IN (2,1,6) DO netsh interface ipv4 add address “Local Area Connection” 174.139.66.%A 255.255.255.248






  • Explanation:


    Start = 2 means IP Address will start from 174.139.66.2


    Step = 1 means 4th octet will add +1 to 174.139.66.2 (the next IP will be 174.139.66.3 and keep adding 1 in last octet)

                 End = 6 means IP Address will end at 174.139.66.6
  • replace “Local Area connection” with



  • And the command should look like this.



  • Press enter to run the command



  • IPconfig to check and it is done